EKSA Telecom H1 Manual Del Usuario página 8

Bluetooth Pairing
2. Turn on the Bluetooth of your device, activate the search feature, and
select "EKSA-H1". After pairing, the Bluetooth indicator flashes slowly
in blue light with a voice prompt "your headset is connected",
confirming a successful connection.
EKSA-H1
Note:
1. Keep the distance between the EKSAtelecom H1 and your device within 1 meter.
2. If necessary, the pin code to complete pairing is "0000".
3. While in pairing state, if a connection cannot be established within 10 minutes,
4. When the headset is turned on again, it will connect to the last connected device
5. Compatibility issues may arise when connecting directly to a computer via
3. To connect to a new device, turn off the Bluetooth of the currently paired
device and follow the above steps to connect successfully to a new device.
EKSA-H1
device A
the headset will turn off automatically.
automatically.
Bluetooth. Preferably with an adapter (not included).
EKSA-H1
device B
1. Turn on EKSAtelecom H1,
until its Bluetooth indicator
flashes alternately between
3"
red and blue, indicating that
the headset is in pairing
mode.
6