LORD W1 2.GN Reparación página 82

Repair
4.5 Replacing door seal
Caution
Sharp housing edges!
Cut injuries
▶ Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
4.5.1 Removing door seal
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
1. Remove detergent drawer.
2. Remove control panel (two screws on right side and four screws on dispenser
area).
3. Remove door.
2021-09-29_8001214502
4. Remove base cover.
5.
Notice
Risk of damaged surface!
Surface of appliance can be scratched by using wrong tools.
▶ Only use plastic tools to replace the tension ring.
Remove tension ring from gasket on front panel with a plastic tool.
6. Remove front panel.
Page 82 of 337