LORD W1 2.GN Reparación página 84

Repair
4.6 Replacing door lock
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
4.6.1 Removing door lock
1. Open front door.
2.
Notice
Risk of damaged surface!
Surface of appliance can be scratched by using wrong tools.
▶ Only use plastic tools.
Remove spring and push away seal.
3. Remove screws on door lock.
4. Release door lock.
5. Remove opening line upwards form guide.
6. Disconnect cable connector.
2021-09-29_8001214502
4.6.2 Installing door lock
Door lock must be in the right position to ensure the emergency door
opening function of the appliance.
Install in reverse order.
▶
Page 84 of 337