heatwell AVANT TOUCH 800 W Manual De Instrucciones página 9

Please, read carefully this user's guide before installing the device.
Make sure the supply voltage corresponds with that on the nameplate (located on the left side of the device).
Check extended user's guide on our website.
8. WALL SUPPORT
-The device includes a mounting kit with the required hardware -rawlplugs and 6 mm screws- and the wall support.
-The rawlplugs supplied with the mounting kit cannot be used on dry walls. For this type of wall, special rawlplugs must be
used.
-When installing the device on the wall, the indicated distance between the following figures must be considered:
TOUCH 800 W
500
250
105
TOUCH 1500 y 2000 W
TOUCH 800 W V
1000
435
105
-Once decided the location to install the device, remove the packaging and extract the device and its mounting kit
-Fix the support to the wall using it as a pattern. A correct stabilization of the support clamp is required. The image below
shows where to drill to fix the support (recommended distance)
Horizontal radiator Vertical radiator