Publicidad
Idiomas disponibles
Idiomas disponibles
In the example given above, the baking time was entered and the automatically calculated baking
completion time was changed by us in the second step. If you desire, it is also possible to ender the
completion time of the baking; in such case, the baking time will be automatically calculated and
changed in the second step, if desired.
IN CASE OF POWER FAILURE
In case the mains power fails, the furnace will deactivate for safety. This situation will be expressed
by the flashing time and auto statements on the display. If there is current program at the moment,
it will delete. The display will show the time as 0:00 and the timer is required to be set. First switch to
the Manual Mode (see Manual Mode). And then you may set the timer by help of + or – keys. (Note.
In case of power failure for seconds, the system will keep the position.)
Note: If you do not intend to operate the furnace, remember to bring the button on the furnace to
'off' position.
THE 'auto' WORD SHOWS THAT THE FURNACE IS DEACTIVATED AND YOU SHOULD SWITCH TO
'MANUAL MODE” TO RESUME NORMAL POSITION.
CHILD LOCK FUNCTION
This function is to prevent change of your settings on the furnace timer inadvertently. When the child
lock is activated, no key will activate. If the key lock is activated when there is a current program,
then only the keys will be locked; and if the lock key is activated when it is in the manual position,
then both the keys will be locked and the furnace will be deactivated.
Note: If the key lock is activated when there is no current baking program, then the furnace will be
deactivated for safety. When the key lock is cancelled, the furnace can be used again.
2- Keep the manual mode keys
pressed for 3 seconds.
1- Display will show the key symbol. (Now child
lock is activated)
29
Publicidad
