Publicidad
Idiomas disponibles
Idiomas disponibles
Control panel may be damaged! Do not remove the control switch to clean the control panel.
Cleaning the furnace
No furnace cleaning agent or other special
cleaners to clean the furnace. It is recommended
to wipe the furnace when it is still lukewarm by
using a damp cloth.
Cleaning and removal of the furnace cover
Do not use aggressive cleaning agents or metal scrapers to clean the furnace's cover; these materials
may scratch the surface and give damage to the glass.
Hot surfaces may cause burns!
1. Open the furnace's cover.
Prior to replacement of the furnace's light, switch off the power and allow it to cool down to prevent
risk of electric shock.
Furnace's light is a special electric lamp resistant to heat up to 300
the lamp, see Technical specifications, page 3.
You may have the furnace lamps from the Authorized Service Centers.
Removal of the furnace's cover
Turn Part A shown in the Figure 1 in
direction of the arrow.
Insert Part A into Part B as shown in
the Figure 2.
Push the furnace's cover forward in
direction of the arrow and push to
yourself as shown in the Figure 3.
36
o
C. For specifications of
V.1
Publicidad
