Publicidad
Idiomas disponibles
Idiomas disponibles
Lamp position may be different from the position shown in the figure.
If your furnace has a round lamp:
1. Switch off the power of the product.
2. Remove the glass cover by turning anticlockwise.
3. Remove the furnace lamp by turning anticlockwise and
replace it with a new one.
4. Replace the glass cover in place.
8) Proposed solutions for the problems
Product does not operate.
Plug (grounded) of the product may not be connected. Make sure it is plugged.
Insurance may be defective or burnt. Control the fuses in the fuse box. If the fuse
disengaged, engage it again.
Mains voltage may be fluctuation. Unplug and plug again.
Steam comes out from the furnace when it operates.
Steam coming out during operation of the product is normal. It is not a failure.
Metal sounds are hard when the product heats up and cools down
Metal parts expands when they are heated, resulting in audible sounds. It is not a cause of
failure.
Furnace does not heat.
No power. Control whether power is available at home and check the fuses in the fuse box. If
required, engage the fuses again.
May be timer has not been set in case of versions with timer. Set the timer or bring it to the
manual (hand) sign.
Possibly function and/or temperature button has not been set.
Set the function and/or temperature button.
Furnace light is not on.
No power. Control whether power is available at home and check the fuses in the fuse box. If
required, engage the fuses again.
Possibly the furnace light is broken. Replace the furnace lamp.
37
V.1
Publicidad
