ECG ZS 1420 Manual De Instrucciones página 41

your power outlet voltage corresponds
to the operating voltage indicated on the
device label. The outlet must be installed
in accordance with applicable electrical
codes according to EN.  DANGER of
electric shock.  Do not use a trimmer if
the device or the power cord has visible
signs of damage or if you have dropped it.
 First connect the cable connector to the
device and then plug the cable into the
power supply.  The electrical outlet must
be easily accessible after connection.
 Make sure that the cable can not be
damaged by sharp edges or hot surfaces.
 Unplug the cable from the electrical
outlet after each charging, in the event of
a malfunction and during storms.  When
unplugging, never pull the cord, but
grasp it by the plug.  To avoid any risk,
do not make any changes to the device or
accessories. Repairs must be carried out by
a specialized company.  DANGER! When
handling Ni-Mh batteries, observe
the following instructions: Charge the
41