• Do not let the power cable hang over the edge of a table or
counter, or touch hot surfaces.
• Do not allow this product to come in contact with curtains, wall
coverings, clothing, dishtowels or other flammable materials
during use.
• Never pour oil directly into the basket. Always use a brush to
lightly brush oil on the food when required.
• Do not leave the product unattended when switched on.
• The surfaces of the product get hot during use.
• Do not touch the hot parts of the product directly.
• The heat of the product may cause damage to the surface the
product is placed on. Always place the product on a flat, stable
and heat resistant surface to prevent damage to the
surroundings of the product.
• Allow the product to cool down before cleaning and storing it.
Before first use
1. Remove all packaging from the outside and inside of the product.
2. Clean all parts that come into contact with food with hot water
and dish soap after each use.
3. Clean the outside of the product with a soft clean, damp cloth.
4. Before first use, perform at least one heating cycle while the
product is empty.
When the product heats up for the first time, it may emit slight
4
smoke or odour. This is normal and does not affect the safety of
the product.
Using the product
1. Place the product on a stable, flat and heat resistant surface.
2. Keep the air outlet A
5
at least 15 cm away from the wall.
3. Place the cooking pan A
6
4. Place the frying basket A
7
pan A
6
.
See chapter 'Cooking / grilling presets' for the suggested
4
accessory per cooking preset.
-
Do not fill the inside of the basket with oil or other liquids. The
product uses hot air to cook your food.
5. Plug the power cable A
q
6. Select one of the cooking / grilling presets B
B
1
shows the default temperature and time of the selected
preset.
7. Press the control dial B
. The temperature on the display B
3
flashes.
8. Rotate the control dial B
3
It is not possible to adjust the temperature when using the grill
4
presets B
4
.
9. Press the control dial B
3
on the display B
1
flashes.
10. Rotate the control dial B
3
To use the product with the probe thermometer, follow steps 11
– 19.
To use the product without the probe thermometer, follow steps
13 – 19.
If you selected the Beef preset, follow the steps in chapter 'Grilling
beef' .
11. Plug the connector of the probe thermometer A
probe thermometer input B
12. Stick the probe thermometer A
The display B
1
shows the measured temperature.
4
13. Press the start button B
6
shows "PRE".
The display B
1
shows "ADD" to indicate that preheating is done.
4
14. Use the lid handle A
to open the lid A
3
shows "OPEN".
15. Place the food inside the product.
16. Close the lid A
4
to start the cooking process.
To pause the preheating or cooking process, press the start
4
button B
6
.
in the product.
or the grill plate A
8
in the cooking
into a power outlet.
24
. The display
to adjust the temperature.
to confirm the temperature. The time
to adjust the cooking time.
9
into the
.
7
9
into the centre of the food.
to start preheating. The display B
. The display B
4
To stop the preheating or cooking process, press the cancel
4
button B
5
The product automatically pauses the cooking process when the
4
lid A
is open. The display B
4
to resume the cooking process.
The product automatically stops when the time runs out. The
4
display shows "DONE' .
17. Open the lid A
-
Be careful, hot steam may escape.
Close the lid and reset the timer and temperature if the food is
4
not ready yet.
-
Do not touch the frying basket A
hands.
18. Remove the prepared food using a kitchen tong.
-
Do not use a metal tool to remove the food to avoid damaging
the coating.
19. Press the cancel button B
display shows "OFF' .
The fan automatically stops after 0 – 60 seconds in standby.
4
Grilling beef
1. Press the "Beef' preset.
2. Plug the connector of the probe thermometer A
probe thermometer input B
3. Press the control dial B
flashes.
4. Rotate the control dial B
It is not possible to adjust the time when using the beef preset,
4
the cooking process stops automatically when the probe
thermometer A
5. Press the control dial B
display B
1
6. Rotate the control dial B
corresponding meat temperature appears on the display B
7. Continue with steps 13 – 19 of "Using the product".
The cooking process stops automatically when you unplug the
4
probe thermometer.
The cooking process stops automatically when the selected meat
4
temperature is not reached within one hour.
Cooking / Grilling presets B
1
Presets
Roast
Bake
Air fry
Beef
Fish
Chicken
Air grill (low)
Air grill
(medium)
1
Air grill (high)
Air grill (max)
1
The cooking result of each dish depends on many variables.
4
The cooking time, temperature, weight and volume of the food
influences the result.
4
.
shows "OPEN". Close the lid A
1
.
4
7
or grill plate A
5
to switch off the product. The
7
.
3
. The temperature on the display B
3
to adjust the temperature.
9
measures the selected meat temperature.
. The doneness option flashes on the
3
.
3
to select the desired doneness. The
24
Default
Default
Accessory
tem-
time
perature
(min.)
(˚C)
200
30
Frying basket A
plate A
175
30
Frying basket A
cakepan (not included)
200
20
Frying basket A
230
12
Grill plate A
265
7
Grill plate A
260
18
Frying basket A
plate A
200
15
Grill plate A
230
15
Grill plate A
260
15
Grill plate A
265
10
Grill plate A
4
8
with bare
9
into the
1
.
1
or grill
7
8
or
7
7
8
8
7
or grill
8
8
8
8
8