cecotec CONGA ROCKSTAR DEEPCLEAN FLEX Manual De Instrucciones página 24

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Handle
2. Dirt tank release tab
3. Dirt tank
4. Dirt tank opening button
5. Vacuuming-tube release button
6. Ergoflex vacuuming tube
7. Vacuuming-brush-head release button
8. Motorised and Jalisco brush.
9. On/Off push button
10. Battery
11. Battery indicator
12. Mode knob
13. Power adapter
14. Accessory for corners
15. 2 in 1 accessory
16. Wall bracket
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport.
Take the product out of the box and remove all packaging materials. Keep the original box
and other elements in a safe place, as this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
- Fully charge the device before first use.
- The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
Box contents
- Conga Rockstar Deep Clean Flex Vacuum Cleaner
- 2 in 1 accessory
46
CONGA ROCKSTAR DEEPCLEAN FLEX
- Corner accessories
- Jalisco brush
- Ergoflex tube
- Wall bracket
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
Fig. 2
- To install the vacuuming brush head into the vacuuming tube, align both of them making
sure the tab on the brush head matches the guides on the tube, and introduce one into the
other until they are firmly fixed.
- To disassemble them, press the Vacuuming-brush-head release button, and pull from the
vacuuming tube while you hold the vacuuming brush head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly
Fig. 3
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 4
Introduce the battery in the slot located in the main body following the guides. Once it is
introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
Note
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
4. OPERATION
You can use this vacuum cleaner in two different manners:
ENGLISH
47
CONGA ROCKSTAR DEEPCLEAN FLEX