H-9600,
KOALA KARE™ HORIZONTAL
BABY CHANGING STATION
TOOLS NEEDED
Phillips Screwdriver
Baby Changing Station x 1
WARNING! Never leave child unattended.
WARNING! Designed for infants only (ages up to
3.5 years and weighing less than 50 lbs.). Keep
one hand on the child at all times.
INSPECTION CRITERIA
A properly maintained baby changing station operates
like the following:
• Opens and closes smoothly.
• Has a functioning strap and buckle. Strap is
held firmly in place when buckle is depressed
over it.
• Has a fully stocked liner dispenser.
• Provides a clean, convenient place for
customers to attend to their children.
PAGE 1 OF 12
H-9602
1-800-295-5510
Level
Stud
Finder
PARTS
Wall Bag Hook x 1
8/32 x 5/16" Flange Button
Head Phillips Screw x 4
SAFETY
uline.com
Measuring Tape
Key x 1
9/32 x 7/8" Phillips
Flat Head Screw x 3
WARNING! Avoid serious injury from falling or
sliding out. Always use restraint system.
WARNING! Parcels or accessory items placed,
or both placed on the unit, may cause the unit
to become unstable.
RESTRAINT SYSTEM
1. Check strap by releasing the lever on the buckle and
pulling one end of strap up through the bottom of the
buckle, depressing the lever when the strap is tight.
Give the strap a tug in the horizontal direction away
from the buckle, checking that the strap remains
in place beneath the buckle. To loosen the strap,
release the lever and pull the strap from the bottom
of the buckle.
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
Drill
1/8" and 7/32" Drill Bits
(regular and masonry)
Flat Washer x 4
1/4 x 3" Pan Head
Wood Screw x 6
0623 IH-9600