Publicidad
Idiomas disponibles
Idiomas disponibles
WALL BAG HOOK INSTALLATION
1.
Locate wall stud and measure 44" up from floor in
the desired location. Mark the wall.
NOTE: Position the bag hook so the top of
the mounting plate is level with the 44" mark.
2. Use the bag hook as a guide to mark and drill
three pilot holes.
3. Use the provided 9/32 x 7/8" Phillips flat head screws
to secure the bag hook in position. (See Figure 8)
Figure 8
• Clean surface of unit prior to disinfecting.
• Use a clean nylon brush or a rag to loosen and
remove soil from the textured surfaces.
PAGE 4 OF 12
INSTALLATION CONTINUED
Bag Hook
4. Install the escutcheon plate and turn clockwise to
cover the mounting screws. (See Figure 9)
Figure 9
Escutcheon
MAINTENANCE
• Use disinfectants and detergents that do not contain
overwhelming fragrances.
1-800-295-5510
uline.com
Plate
0623 IH-9600
Publicidad
