Anker 553 Manual Del Usuario página 6

Controls and Ports
Magnetic Remote
1
Selector
Rear View
DC-IN Port
2
PC 1 Port
PC 2 Port
DisplayPort Output
7
Port
HDMI Output Port
8
Side View
Audio In / Out
9
Front View
USB-C 3.2 Gen 1
10
Port
USB-A 3.2 Gen 1
11
Data Port ×2
Description
Press the remote selector to switch between two connected
computers.
• The blue LED indicates the current selection is PC 1.
• The yellow LED indicates the current selection is PC 2.
Plug one end of the included 100W power adapter into the DC-IN
port and the other into a power outlet.
3
USB-C Input Port
4
USB-C Data Input Port
5
DisplayPort Input Port
6
HDMI Input Port
For 4K@60Hz resolution, connect your monitor to the KVM using
the DisplayPort output port.
Note that the DisplayPort output port only works with the
DisplayPort input port.
For 4K@60Hz resolution, connect your monitor to the KVM using
the HDMI output port.
Note that the HDMI output port only works with the HDMI input port.
Connect to earphones or other devices with a 3.5 mm AUX
connector.
Up to 5 Gbps data transfer.
Power output up to 20W.
Up to 5 Gbps data transfer.
Connect your laptop to the PC 1 port
via the included USB-C cable.
Supports 65W power output to
charge your laptop.
Connect your desktop PC to the PC 2
port via the included USB-A to
USB-C cable.
Connect your desktop PC to the PC 2
port via the included DisplayPort
cable.
Connect your desktop PC to the PC 2
port via the included HDMI cable.
EN 02