Grandstream GWN7830 Guía De Instalación Rápida página 5

ACCESS & CONFIGURE
Note: If no DHCP server is available, the GWN7830 default IP address is 192.168.0.254.
Method 1: Login using the Web UI
1. A PC uses a network cable to correctly connect any RJ45 port of the switch.
2. Set the Ethernet (or local connection) IP address of the PC to 192.168.0.x ("x" is any value between 1-253), and
the subnet mask to 255.255.255.0, so that it is in the same network segment with switch IP address. If DHCP is
used, this step could be skipped.
3. Type the switch's management IP address http://<GWN7830_IP> in the browser, and enter username and
password to login. (The default administrator username is "admin" and the default random password can be found
at the sticker on the GWN7830 switch).
Method 2: Login using the Console port
1. Use the console cable to connect the console port of switch and the serial port of PC.
2. Open the terminal emulation program of PC (e.g. SecureCRT), enter the default username and password to login.
(The default administrator username is "admin" and the default random password can be found at the sticker on
the GWN7830 switch).
Method 3: Login Remotely using SSH/Telnet
1. Turn on the Telnet of the switch.
2. Enter "cmd" in PC/Start.
3. Enter telnet <GWN7830_IP> in the cmd window.
4. Enter the default username and password to login. (The default administrator username is "admin" and the default
random password can be found at the sticker on the GWN7830 switch).
Method 4: Configure using GWN.Cloud / GWN Manager
Type https://www.gwn.cloud (https://<gwn_manager_IP> for GWN Manager) in the browser, and enter the
account and password to login the cloud platform. If you don't have an account, please register first or ask the
administrator to assign one for you.
The GNU GPL license terms are incorporated into the device firmware and can be accessed
via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed
here: https://www.grandstream.com/legal/open-source-software To obtain a CD with GPL
source code information please submit a written request to: info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
~ 5 ~
概述
ZH
GWN7830作为3层汇聚型网管交换机，专为中大型企业构建百分百可管理的可扩展、
安全、高性能的智能网络。它提供了最大交换容量为240Gbps
（10/100/1000Mbps）, 6 个 SFP 端口和 4 个 SFP+ 端口 。既可以用于高级VLAN进
行灵活复杂的流量隔离，也可以用于高级QoS对强敏感性的语音/视频流量进行自动检
测和优先处理，还可以用于组播侦听进行网络性能优化，以及针对潜在攻击的综合安
全功能。GWN7830支持通过多种方式管理，包括嵌入式本地网络控制器、命令行接口
CLI、Grandstream的免费本地网络管理私有云平台(GWN
Cloud)。凭借完整的端到端服务质量和灵活的安全设置，GWN7830是面向中大型企业最具
效益的汇聚型网管交换机。
注意事项
- 请勿尝试打开、拆解或修改设备。
- 不要将本设备暴露在温度超出 0℃至45℃的工作环境或超出-10℃至 60℃的储存环境。
- 请勿将本设备暴露在工作湿度10-90％RH（无冷凝）和储存湿度 10-90％RH（无冷凝）
的环境中。
- 系统启动或固件升级期间，请勿断开电源。这可能会损坏设备固 件，并导致设备故障。
包装清单
1x GWN7830 交换机
1x 电源线防 脱扣
1x 1.2m(10A)电源线
端口&LED指示灯
前置面板
1 3
2 4
后置面板
10
2 以太网RJ45端口
Manager)和公有云平台(GWN.
1x 25cm
4x 橡胶脚垫 1x 快速安装手册
接地线
8x 螺丝(KM 3*6)
2x 加长版挂耳支架
5
6
11
~ 6 ~
7
8
9
12