Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Kuat PISTON PRO
Resumen de contenidos para Kuat PISTON PRO
- Página 1 PISTON ® LICENSE PLATE MOUNT ASSEMBLY VIDEO...
- Página 2 Parts (1) License Plate Mount (2) M5 Nuts (2) M5 x 16 Socket Caps (2) M5 Washers Tools (1) 3mm Hex Wrench (1) 8mm Wrench...
- Página 3 Installation Disassemble the PISTON PRO device by detaching the endcap. Retain your endcap if LICENSE PLATE MOUNT may be removed in the future. Connect the LICENSE PLATE MOUNT to the center beam and fasten it using the endcap bolt. Affix your license plate onto LICENSE PLATE MOUNT faceplate using the provided (2) M5 x 16 socket caps, (2) M5 Washers and (2) M5 Nuts.
- Página 4 While transporting bicycles with the PISTON® PRO, pivot the LICENSE PLATE MOUNT forward. For storage purposes, pivot it back down.
- Página 5 Küat Rack Warnings ® PISTON ® LICENSE PLATE MOUNT WARNINGS • Follow instructions for proper assembly, installation and use. • Check tightness of all bolts and screws periodically. • Make sure rack is in working condition before each use. • You are responsible to use the license plate mount in compliance with the laws in your state or jurisdiction.
- Página 6 You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty. www.kuat.com/warranty Questions or comments? Drop us an email or call us directly! kuat.com info@kuat.com...
- Página 7 1.877.822.5828 info@kuat.com kuat.com...