XZOUND ANC-60 Instrucciones De Uso página 4

FUNCTIONS / EN
PRODUCT OVERVIEW
1. Power button
2. USB-C port (charging and audio input)
3. Touch control on the ear cups
3
1
2
POWER ON/OFF
Turn on: Press the power button for 5 seconds until the LED turns white.
Turn off: Press the power button for 5 seconds until the LED light goes off.
BLUETOOTH CONNECTION
Step 1: Press the power button for 5 seconds until the LED turns white.
The headphones will automatically enter pairing status, marked by the
LED indicator flashing between white and orange.
Step 2: Activate the Bluetooth function on the electronic device and search
for "XZOUND ANC-60" referring to your device instructions.
Step 3: Manually click "XZOUND ANC-60" to connect. If the LED turns white, the connection is successful.
Note: The headphones can automatically enter pairing status after power on if it can't reconnect to the device
it was previously paired with. Furthermore, since the headphones supports automatic reconnection with the
previous device that were paired, simply turn it on to reconnect with the device it was last paired with.
WIRED MODE
Connect the headset to the electronic device with the provided TYPE-C to 3.5mm audio cable.
* Only microphone function is availible in this mode.
* Other functions incl. active noise reduction, pause/play, volume
adjustment and previous/next song cannot be used.
/4 USER GUIDE / XZOUND
^