Beper P202ASP300 Manual De Instrucciones página 9

Wet and Dry Vacuum Cleaner Use Instructions
When operating the appliance, never turn the suction hose and nozzles towards yourself or
other people, especially towards the eyes and ears. There is a danger of injury.
Switch off the appliance and pull the mains plug when not in use, when transporting or lea-
ving the appliance unattended, when checking the appliance, cleaning it or clearing blocka-
ges; when carrying out cleaning or maintenance work or when replacing accessories; after
contact with foreign bodies or if you feel strange vibrations.
Make sure that the appliance is assembled correctly and that the filters are in the right posi-
tion.
Do not work without a filter, you could damage the appliance.
Do not block and check that the air inlet is not blocked.
Do not turn the appliance upside down during and after use.
Do not tear, step on or carry the hose in case of damage.
Do not immerse the appliance in water.
Product description Fig.A
1. Modular tube (3 parts)
2. Handle
3. ON/OFF switch
4. Lid
5. Suction connector
6. Plastic hose
7. Floor brush for solids and liquids
8. Caster wheels
9. Base
10. Steel tank
11. Connector for blower function
12. Closing hooks
13. Sponge filter
14. Paper bag
15. 2 in 1 crevice nozzle
16. Fabric/non-woven filter
Assembly
Take all components out of the packaging.
Insert the four wheels under the base, in the appropriate slots ( Fig.B ). Turn the bin upside down and insert the base
on the bottom ( Fig.C ).
Insert the suction connector into the air inlet hole and turn it clockwise towards the closed padlock symbol
To release the hose, turn the connector counterclockwise towards the open padlock symbol
To use the blow function, hook the hose into the blower function connector ( Fig.D ).
Connect the three parts of the tube assembly to the hose. Select and attach the desired accessory and connect it to the
tube ( Fig.E ). Use the floor brush to vacuum solids and liquids.
Instructions for Use
Open the lid by pressing the two locking hooks inwards and lifting the lid.
Make sure the filters are correctly in place.
Either for vacuuming solids and liquids, the sponge filter must always be positioned, on the water valve located under
the motor ( Fig.F ).
Position the paper bag so that the hole is hooked to the suction connector inside the bin ( Fig.G ).
Position the fabric/non-woven filter resting it against the upper part of the bin: the plastic edge of the filter must fit into
the edge of the drum.
Attention: to vacuum liquids, do not insert the paper bag and the fabric/non-woven filter
Warning: Do not immerse yourself in the water to be vacuumed. Danger of electric shock.
To vacuum solid materials, simply insert the sponge and fabric filter, the paper bag is suitable for vacuuming very fine
dust or to try to keep the fabric/non-woven filter cleaner.
During use, if you notice a decrease in the suction force, it means that the container is full, then switch off the appliance,
unplug it and discard the waste.
After each use, turn off the appliance, unplug it and empty the tank.
9
EN
to lock it.
.