PATONA Autarc 5000 Manual Del Usuario página 14

EN I PATONA Platinum Powerstation Autarc 5000
01 On/Off switch
► Press and hold the power button for 3 seconds to start the system.
► Hold the switch again for 3 seconds to turn the screen on or off.
02 AC switch
► Press the AC switch to turn the AC output ports on/off.
► You have 5 AC output ports (Schuko) available.
► Press the AC switch AND the on/off switch for 3 seconds to change the frequency.
► Press the AC switch 10 times in a row to change the AC output power (220V or 230V).
► The electrical load must not exceed 2200W.
Caution:
The standards of voltages are different from country to country. Bitterly check the compatibility in terms of voltage and
frequency before connecting the power station.
03 DC switch
► Press the DC switch to turn the DC output ports on/off.
► The following outputs are available:
• 1x car pug 12V 10A
• 1x RV aviation plug 24V 10A
• 2x hollow plug 12V 3A
04 USB switch
► Press the USB switch to switch the USB outputs on/off.
► The following outputs are available:
• 2x USB-A 5V 2.4A
• 2x USB-A QC 3.0 18W
• 2x USB-C PD 100W
05 Display
DISCHARGE
REMAINING
01 Time-of-use/charging time
04 Fan status
07 PV charging function
10 Output RV 24V
13 Whisper mode
16 Gentle charging
19 PD output
Mins
Hours
02 High temperature protection
05 Power supply
08 Total input power
11 Output car connection 12V
14 DC connected
17 Overload protection
20 AC output
13
Overload
03 Low temperature protection
06 UPS function
09 Total output power
12 DC output 12V
15 Quick charge mode
18 USB output
21 Frequency
INPUT
Watts
OUTPUT
60 Hz
Watts