Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and maintenance / Temperature and water flow curve
• Cleaning and maintenance
•
• Standard note on fitting care
•
and cleaning
To clean the aerator,
housing
1
anticlockwise and remove the
aerator
2
and aerator gasket
limescale residues from the aerator
screw the individual parts together again.
If the water flow becomes weaker or irregular,
the filter
19
in the fitting thread should be
cleaned. To clean it, loosen the flex. connect-
ing hose
14
from the fitting thread
remove the filter
19
from the fitting thread
18
with a finger or a blunt object. Remove
limescale residues from the filter
it back into the fitting thread
ing facing downwards. Then fasten the flex.
connecting hose
on the fitting thread.
14
• Replace cartridge (7) (Fig. F)
•
Step 1:
Unscrew the lever
10
Step 2:
Pull off the lever cover
Step 3:
Unscrew the screw inside
included) and pull out the lever wheel
Step 4:
Unscrew the lock nut anticlockwise
Step 5:
Unscrew the 6 screws
cluded), remove the cartridge housing
then the cartridge
4
Replace the cartridge and reassemble in
reverse order.
14
GB/IE/NI
2
unscrew the aerator
3
. Remove
and
2
18
and
19
and place
18
with the open-
from the lever cover
11
9
(screwdriver not
8
6
7
(screwdriver not in-
5
and
.
• • Temperature and
water flow curve
• Dependence on temperature
•
and flow rate
The greater the flow rate of the hot water, the
cooler the water.
If the water only reaches lukewarm tempera-
ture, reduce the water flow using the lever
18
(°C)
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
500
1000
1500
Water flow
•
• Troubleshooting
1) Water flow becomes weaker:
see chapter Cleaning and maintenance –
The filter
18
the aerator
11
.
2) The water does not heat up
(no display):
the mains plug is not correctly seated in the
socket – correct the position of the mains
plug
3) The socket is faulty – try another socket:
there is no mains voltage –
Check the fuse in the fuse box
4) The water only reaches lukewarm temper-
ature
(despite the display):
reduce the water flow/flow rate in the hot
water range
5) Fuse in fuse box has tripped:
Too many devices in a circuit – reduce the
number of connected devices.
3500
2000
2500
3000
4000
4500
in the fitting thread
18
2
should be cleaned.
10
5000
5500
6000
(mL )
and
Publicidad
