Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
STORAGE
Store the sprayer and battery indoors in a warm, dry
location out of direct sunlight and away from any
sources of moisture or intense heat. Do not store
the sprayer where freezing temperatures (below
32° F / 0° C) will occur. Allowing water to freeze inside
the sprayer may cause damage to the pump, seals,
shut-off, or other components, and void the sprayer
warranty.
TRANSPORTATION
WARNING: FIRE HAZARD. Do not store, carry, or
transport the battery pack so that metal objects can
contact exposed battery terminals. For example, do
not place the battery pack in aprons, pockets, tool
boxes, product kit boxes, drawers, etc., with loose
nails, screws, keys, coins, hand tools, etc.
When transporting individual battery packs, make
sure that the battery terminals are protected and well
insulated from materials that could contact them
and cause a short circuit.
NOTE: Li-ion battery packs should not be put in checked
baggage on airplanes and must be properly protected
from short circuits if they are in carry-on baggage.
MAINTENANCE
WARNING: To reduce the risk of serious personal injury,
turn unit OFF and remove the battery pack before
making any adjustments or removing / installing
attachments or accessories. An accidental start-up can
cause injury.
WARNING: RISK OF PERSONAL INJURY AND/OR
PROPERTY DAMAGE DUE TO CHEMICAL EXPOSURE.
Always ensure that all chemicals have been removed
from the sprayer and the sprayer has been cleaned
prior to performing any maintenance.
WARNING: Disconnect the battery pack from the
sprayer before making any adjustments, changing
accessories, or storing the sprayer. Such preventative
measures reduce the risk of starting the sprayer
accidentally.
WARNING: RISK OF PERSONAL INJURY. Always
release pressure from the sprayer prior to performing
any maintenance. Disassembly of a sprayer that is
still pressurized may result in the high-speed ejection
of components. Ensure the sprayer is OFF and squeeze
the shut-off lever until all pressure is released.
16
Repairs
The charger and battery pack are not serviceable.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a CRAFTSMAN
factory service center or a CRAFTSMAN authorized
service center. Always use identical replacement parts.
Shut-off Assembly Maintenance
WARNING: Prior to performing maintenance,
always depressurize the sprayer by turning the sprayer
OFF and squeezing the shut-off lever to spray until
liquid flow stops.
1. Unscrew the hose nut (1) from the shut-off
assembly (2).
2. Remove the hose with attached filter (3) from the
shut-off assembly (2).
3. Clean any debris from inside the shut-off
assembly (2), or the filter (3) by rinsing with cool,
clean water.
4. Reassemble the components as shown and
tighten all connections securely.
Fig. 15
1
3
Nozzle Maintenance
WARNING: Prior to performing maintenance,
always depressurize sprayer by ensuring the sprayer
is OFF and then squeezing the shut-off lever to spray
until liquid flow stops.
• If a nozzle clogs, remove and disassemble the
nozzle assembly.
• Clean the openings of any obstructions or residue.
• Do not use sharp tools that could scratch or
damage the nozzles as spray pattern could be
affected.
• Do not hit nozzle against surfaces to unclog.
2
Publicidad
