i-tec C31TYPEA Manual De Instrucciones página 5

INTRODUCTION
Thank you for purchasing „i-tec USB-C Slim HUB 3 Port With Gigabit Ethernet
Adapter". This is a product that combines the functions of 3-port USB 3.0
HUB with Gigabit Ethernet adapter.
The HUB offers three USB 3.0 ports with Plug & Play option. The USB 3.1 / 3.0
interface is important mainly for data transfers from USB 3.0 memory cards
and flash disks which will use its high transfer speed most. HUB is powered
from the USB-C bus and has a built-in surge protection for your computer in
the event of a short circuit on the peripheral devices. You will just connect the
HUB by the USB-C cable to your computer and immediately you can start using
it. You can connect and disconnect your favorite USB devices such as flash
drives, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
The Gigabit Ethernet port allows user's computer instantly connect to
a 10/100/1000Mbps network. No need to purchase an extra Gigabit network
card and share a PCI or Cardbus slot. With compliance with USB 3.1
specification, this adapter ensures true 10/100/1000Mbps network speed
without any compromise. Besides, compact and bus-powered design means
external power is not required.
SPECIFICATION
• 3x USB-A 3.0 port for connecting USB equipment
• 1x USB 3.1 (Gen. 1) Type-C connector for connecting to a notebook /
tablet / PC
• 1x Ethernet 10/100/1000Mb/s LAN RJ-45 port with function MDI/MDIX
and self-correction
• VIA VL813 chipset compliant with USB 3.0 specification, revision 1.0
• ASIX AS88179 USB 3.0 to Gigabit Ethernet Adapter chipset – supports
standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az
(Energy Efficient Ethernet)
• Interface USB 3.0, backward compatible with USB 2.0
• LED indication for Ethernet connection
• Supports Wake-on-LAN
• Operation temperature: 0-40°C
• Storage temperature: -10 to +80°C
• Humidity: up to 85%
• Dimensions: 125 x 29 x 15 mm
• Weight: 50 g
SYSTEM REQUIREMENTS
Hardware requirements: Notebook / tablet / PC with free USB-C port.
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, macOS X (macOS 11.0
- 11.2 not supported), Linux, Android
DRIVER INSTALLATION*
*The driver version is subject to change due to the driver updated.
Note: DO NOT connect the device to your computer before completing the
installation of driver!
Quick Start
| 5
ENGLISH