Publicidad
Idiomas disponibles
Idiomas disponibles
UHF-100&200 SYSTEM OPERATION - HANDHELD MIC VERSION
1. Unpack all the components of the system. We recommend that you keep your
packaging.
2. Connect the AC adapter to the power connector on the back of the receiver and
receiver and then to the power outlet.
3. Connect the audio cord to the OUTPUT jack on the back of the receiver.Note:
The UHF-200R dual receiver has 3 audio outputs: 1 balanced XLR output for
each channel and 1 6.35mm jack output for the «mixed» output (channel 1 +
channel 2).
4. Unfold the antennas.
5. Press the power switch on the receiver, the power indicator will light up.
6. Select the frequency you want to use with the SET button.
7. On the handheld microphone, open the battery compartment. Insert the battery
in the direction shown.
8. Turn on the handheld microphone, if the battery indicator light is flashing, your
battery is low.
9. Press the IR button on the handheld microphone and then the IR button on the
receiver. Move your microphone closer to the receiver screen to pair.
10. Adjust the receiver volume.
Publicidad
