VEVOR SH-3ABE Manual De Usuario página 91

ASSEMBLY STEPS
Support frame and sensor installation steps
1. Connect the upright post of the support frame (screw connection,
please do not plug it directly) ;
2. Install the cross bar fixer of the support frame;
3. install the support rail;
4. Install the fixing buckle between the support frame and the agitator
body;
5. Install the stirring rod;
Fix the support frame and the agitator main body, and connect the agitator
bar power supply according to the socket of the main body.
Precautions for installation:
1. This product is a precision experimental instrument. Please operate
according to the interface during installation.
2. Please install in strict accordance with the installation steps;
3. After installation, please check the verticality of the support frame and
the levelness of the support rail.
4. Please ensure that all parts are tightly connected without looseness;
If you find that the connection part is loose during use, please stop using it
immediately and reinstall it to avoid causing parts and experiments.
The instrument is damaged.
6