VEVOR SH-3ABE Manual De Usuario página 93

Operation mode:
1. Place the machine on a horizontal desktop, and then connect the power
cord to the power outlet on the back of the base.
2. Plug the other end of the power cord into a standard socket.
3. Pay attention to the power switch on the right side of the base. The line (-)
indicates on, and (o) indicates OFF.
4. Place the machine stably, put the beaker with the liquid medicine in the
center of the working plate, put an appropriate rotor in the beaker and make it
in the center of the beaker, turn on the power supply, and the upper row of the
instrument displays the temperature of the furnace plate (if the sensor is
connected externally, the temperature of the external sensor is displayed), and
the lower row displays "Off". Press the "HEAT" button to start the machine to
run and HEAT up. Similarly, press the "STIR" knob once, and the machine will
start to STIR, and adjust it to the required speed by rotating the "stir" knob.
(When the knob rotates, the lower row of the instrument will display the set
rotation speed for 2 seconds after the end of rotation, and the lower row of the
instrument will display the current rotation speed).
5. If you need to measure the temperature of the liquid in the beaker, you can
connect the bracket, insert the sensor lead plug into the back of the machine,
and then insert the sensor into the liquid. At this time, the temperature
displayed by the instrument is the liquid temperature.
Precautions for use
1. should avoid using in a humid environment.
2. When in use, the liquid medicine in the beaker should not be too full to
prevent it from overflowing when stirring.
3. Don't touch the oven plate during use to avoid burns.
8