Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Changing the key detector name
1
Handset:
For key detector 1: MMENUN#6561
For key detector 2: MMENUN#6562
For key detector 3: MMENUN#6563
For key detector 4: MMENUN#6564
*1
2
Enter the desired name (10 characters max.).
3
MSAVEN a MOFFN
Attaching the key detector to an easy-to-lose item
You can attach the key detector to items such as a car key or house key, etc.
Locating and finding a mislaid item
You can locate and find the mislaid item to which the key detector is attached using
the handset.
1
Handset: MMENUN#655
2
MbN: "Search" a MSELECTN
3
MbN: Select the desired key detector. a MSELECTN
R When the handset searches for the key detector, the handset emits the
R The search is stopped after 3 minutes. To continue searching, repeat from
R While searching, you can turn off the handset detection beeps by pressing
4
To stop searching, press MOFFN.
4
TGA20(en-en)_1201_ver022.pdf
If you have 2 or more key detectors.
detection beeps and displays the signal strength (5 levels) and level value
(1 – 100), and then the key detector emits responding beeps. As you point
the handset in the right direction and then move closer to the item:
– Handset: the frequency of the detection beeps will increase and a higher
signal strength and level value will be displayed.
– Key detector: the responding beeps are emitted during searching.
step 3.
MMUTEN.
4
*1
*1
*1
2012/12/01
19:54:54
Publicidad
