DELTA DORE TYXIA 1701 Manual Del Usuario página 19

2.1.2 If several motors are switched on
❶ On the remote control, press
same time and hold for 3 seconds, until the red LED
flashes. Release the buttons.
The remote control searches for the various motors.
The LED flashes red, then briefly green as soon as a new
motor is found.
❷ When the LED starts flashing red slowly, press the
button as many times as required to select the
1
motor to be paired.
The corresponding shutter activates briefly.
❸ Once themotor has been found, press
❹ After a few seconds, the shutter activates twice to
confirm pairing.
❺ To exit pairing mode, press
❻ Then proceed with the setting of the stops (see
motor instructions).
2
and at the
.
for 3 seconds.
2
1
EN
1 1 2 2
1
19