Publicidad
Idiomas disponibles
Idiomas disponibles
6. Time and alarm setting
Press and hold the "Settings" button for 2 seconds to access the time setting.
1.
The 12/24-hour display starts flashing. Press "+" or "-" button to set the
time.
2.
Press the "Settings" button to confirm. Then the hour flashes. Set the
hours and confirm by pressing the "Settings" button again.
3.
Repeat the procedure with the minutes display.
4.
Then set the alarm time, starting with the hour. Then press the "Settings"
button to confirm the entry.
5.
Repeat the procedure for the minutes display of the alarm.
6.
You can then select the unit. Select between "°C" and "°F" and confirm
with the "Settings" button.
7.
You can now exit the setting mode. You can also save the setting and exit
the setting mode by not pressing any button for about 30 seconds.
8.
If you need to add or subtract quickly during the setting process, you
can press and hold "+" or "-" for more than 2 seconds to make a quick
adjustment.
6.1 Enabling/disabling the alarm
Press the "Settings" button brieflyto switch the alarm function on or off. When
the alarm is switched on, a symbol appears above the time in the display.The
alarm sounds for 1 minute. You can touch the "Snooze" button to activate the
snooze function for 5 minutes. Press any other button on the device to turn off
the alarm and stop the alarm directly.
English
21
Publicidad
