Publicidad
holes (Figure 1). Skip this step if you want to mount the seat in a lower position
(lower legs only).
2. Mounting the lower legs - figure 2: Connect the lower support tubes (legs)
to the upper tubes assembled to the seat as shown in figure 2, or mount them
directly to the seat body when selecting a lower seat position. Push until you
hear a clicking sound and the spring-loaded tabs tighten and pop out of their
holes (Figure B).
3. Mounting rubber feet - figure 3: Insert the four rubber feet into the lower
support tubes (legs) as shown in figure 3.
4.Footrest Installation - Figure 4: Align the footrest at the bottom end of the
upper support tubes and install it using the bolt and nut as shown in Figure 4.
Align the footrest (7) with the recess in the lower end of the upper support
tubes and fix it
5.Mounting the upholstery together with the 5-point seat belt - Figure 5:
Attach the upholstery to the seat body and fit the five-point seat belt (see
Figure 5).
6. Mounting the tray with the anti-slip device - Figure 6: The anti-slip device
of the tray is assembled to the tray, then the tray is fixed to the seat body.
Using the 5-point seat belt: The five-point seat belt is designed to ensure the
safety of your child and must be used at all times. To unfasten the belt, press
the buckle button and pull the fastener. To fasten the belt, insert the belt
buckles at the waist into the holes in the buckle and press until they lock.
Sliding controls are mounted on the straps and waist belt. The straps should
be carefully adjusted to the child's comfort.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean only with a soft, slightly damp cloth.
Regularly check fixed and moving parts for looseness, damage or breakage. Do not
repair the product yourself, but contact an authorized service center or the sales agent
from whom you purchased the product. Otherwise, your warranty will be void.
Periodically clean the product. Do not leave the product to the harmful effects of
external factors - direct sunlight, rain, snow or wind. This can damage metal and plastic
parts and bleach upholstery. Store the product in a dry and ventilated place, not in
dusty, damp rooms with very low or very high room temperatures.
Manufactured for Moni in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
19
Publicidad
