1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (fig. 1)
1.
Pressure connection
2.
Transport handle
3.
On/off switch
4.
Bracket for screws
5.
Water drain plug
6.
Suction connection
7.
Screw-on pre-filter cap
8.
Pre-filter
3. Scope of delivery
Item
4. Proper use
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/oper-
ator, not the manufacturer, is responsible for damages
or injuries of any type resulting from this. An element of
the intended use is also the observance of the safety
instructions, as well as the assembly instructions and
operating information in the operating manual. Persons
who operate and maintain the machine must be familiar
with it and must be informed about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed. Other general occupa-
tional health and safety-related rules and regulations
must be observed. The liability of the manufacturer and
resulting damages are excluded in the event of modifi-
cations of the machine.
Area of application
• For watering and irrigation of green areas, vegetable
beds and gardens.
• For operating lawn sprinklers.
• With pre-filter for drawing water from ponds, streams,
rainwater barrels, rainwater cisterns and wells.
www.scheppach.com
Quantity
Designation
1x
Operating manual
1x
Garden pump
GB | 19