Publicidad
Idiomas disponibles
Idiomas disponibles
Pumped media
For pumping clear water (fresh water), rainwater or light
detergent solutions / domestic water.
• The maximum temperature of the pumped liquid
must not exceed +35°C.
• This pump must not be used to pump flammable,
gaseous or explosive liquids.
• The pumping of aggressive liquids (acids, lyes, silo
seepage juice etc.), as well as liquids with abrasive
(sanding) materials (sand) must also be avoided.
The machine may only be operated with original parts
and original accessories from the manufacturer. The
safety, operating and maintenance specifications of the
manufacturer, as well as the dimensions specified in
the technical data, must be observed.
Please note that our equipment was not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the device is used in commercial
or industrial applications, or for equivalent work.
5. General safety instructions
m WARNING - Read all safety information, instruc-
tions, illustrations and technical data for this elec-
tric tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" used in the safety instructions
refers to mains-powered electrical tools (with a mains
cable) and battery-powered electrical tools (without a
mains cable).
General safety instructions
• This product is not designed to be operated by per-
sons (including children) with impaired physical,
sensory or mental capabilities, or who have insuf-
ficient experience and/or insufficient knowledge un-
less they are being supervised by a person who is
responsible for their safety or they are receiving in-
struction about how this Product is to be used. Chil-
dren should not be left unattended, to ensure they
do not play with the power tool.
• Persons who are unfamiliar with the operating man-
ual may not use the product. The product is not to be
used by persons under the age of 16.
• The product must not be operated if there are people
in the water.
20 | GB
• Keep children away from the running engine.
• Dispose of the packaging material properly.
• Do not use the product in the vicinity of combustible
fluids or gases. There is a risk of fire or explosion if
disregarded.
• The pumping of aggressive, abrasive (scouring),
corrosive, flammable (e.g. motor fuels) or explosive
liquids, salt water, cleaning agents and foodstuffs is
not permitted.
• Store the product in a dry place and out of reach of
children.
• The temperature of the pumped liquid shall not ex-
ceed 35°C.
• Do not work with a damaged, incomplete or modified
product without the consent of the manufacturer. Be-
fore commissioning, have a specialist check that the
required electrical protective measures are in place.
• Supervise the product during operation in order to
protect the pump for automatic shut-down and against
running dry. Check the function of the float switch reg-
ularly (see chapter "Commissioning"). Failure to do
so will invalidate warranty and liability claims.
• Please note that the pump is not suitable for continu-
ous operation (e.g. for watercourses in garden ponds).
Regularly check the product for proper function.
• Please note that lubricants are used in the product,
which may cause damage or contamination due to
leakage. Do not use the pump in garden ponds with
fish or valuable plants. If lubricants leak out, they
may contaminate the liquid.
• Do not carry or attach the product by the cable or hose.
• Protect the product against frost and running dry.
• Only use original spare parts and accessories and
do not modify the product.
• Please read the information on "Cleaning, mainte-
nance, storage" in the operating manual. All addi-
tional measures, in particular opening the product,
must be carried out by a qualified electrician. In the
event of repair, always contact our service centre.
Electrical safety instructions
• The mains plug must remain freely accessible when
operating the product.
• Before you put your new pump into operation, have
it professionally checked:
- Earthing, connection of the neutral line and resid-
ual current circuit breaker must comply with the
safety regulations of the power supply companies
and function properly.
- Protect the electrical plug connections from mois-
ture.
www.scheppach.com
Publicidad
