Testboy TV 296 Instrucciones De Empleo página 22

Safety instructions
Safety instructions
WARNING
Sources of danger are e.g. mechanical parts that can cause serious injuries to
persons.
There is also a risk of damage to objects (e.g. damage to the unit).
WARNING
Electric shock can cause death or serious injury to persons as well as a hazard
to the function of objects (e.g. damage to the appliance).
WARNING
Never point the laser beam directly or indirectly at the eye through reflective
surfaces. Laser radiation can cause irreparable damage to the eye. When
measuring near people, the laser beam must be deactivated.
General safety instructions
WARNING
For safety and approval reasons (CE), unauthorised conversion and/or
modification of the unit is not permitted. To ensure safe operation with the unit, it
is essential to observe the safety instructions, warnings and the chapter
"Intended use".
WARNING
Before using the appliance, please observe the following instructions:
| Avoid operating the unit near electric welders, induction heaters and other
electromagnetic fields.
After abrupt temperature changes, the unit must be adjusted to the new
|
ambient temperature for approx. 30 minutes before use to stabilise the IR
sensor.
| Do not expose the unit to high temperatures for a long time.
Avoid dusty and humid environmental conditions.
|
| Measuring instruments and accessories are not toys and do not belong in
children's hands!
In commercial facilities, the accident prevention regulations of the Federation
|
of Institutions for Statutory Accident Insurance and Prevention for electrical
installations and equipment must be observed.
22
®
Testboy TV 296