Kiwi KIWI2 Manual De Usuario página 8

INDICATIONS FOR POD INSERTION AND
REMOVAL
Insert and remove the Pod:
Insertion - The white "K" LED will ash once
accompanied by three vibrations, indicating a
good contact.
Removal - The red "K" LED will ash once to
indicate the Pod has been successfully
removed.
SWITCHING THE SUCTION VIBRATION
MODE OF THE PEN
To turn on or o the suction vibration mode of
the Pen, follow these steps:
By default, the Pen is set to suction with vibration
mode. Plug and unplug the Pod ve times within
four seconds. If done correctly, the Pen will
switch its suction vibration mode.
When the mode is successfully switched, the
white light will ash for two seconds, accompa-
nied by the motor vibrating for two seconds.
In the suction vibration mode, there will be a
light vibration when suctioning.
06