Arenti OP1 Guía Rápida página 4

Notice
To reset the device, press and hold the reset button
for 5s. The camera beeps when the operation is
completed.
LED indicator of camera:
Flashing red light (slow)
Flashing red light (fast)
Fixed red light
Fixed blue light
3. Installation
Wall Mounting
②
①
1. Take the camera power cable through the bracket.
2/3. Install the expansion screws and mounting screws.
4. Insert the camera into the bracket and point the
camera black arrow at the bracket Unlock logo.
5. Rotate the camera until it snaps into the bracket
with the black arrow pointing at the Lock logo.
support@arenti.com
Wait for network config
Connecting the network
Camera is malfunctional
Camera network is normal
③
EN
④
④
⑤