Arenti OP1 Guía Rápida página 7

Select the Wi-Fi network and input the password,
and then click "Next". Make sure that phone has
connected to a fluent and steady Wi-Fi already.
Scan the QR code in your phone with the camera
and click "Next", when the camera comes out "dong
dong dong" and LED indicator becomes solid blue.
If no device is found and the pairing process is not
successful, please check below instructions:
1. Wi-Fi network is 2.4GHz/5GHz.
2. Wi-Fi password entered is correct and the same
Wi-Fi network is used on the mobile device.
3. Camera is in pairing mode.
4. Check your WiFi for network activity.
Notice
If you have multiple cameras, please follow steps
again to add one by one. To change Wi-Fi network,
please restore the camera to factory settings and
add again.
support@arenti.com
EN
Scan the
QR code
of APP