Arenti PETCAM1T Guía Rápida página 11

Step � Click "Next" and use the camera to scan the QR code
in the App on your mobile phone, when the sound "dong dong
dong" is heard, click "Notification tone heard." , and then the
LED indicator will become solid blue after few seconds.
If no device is found and the pairing process is not successful,
please check below instructions:
�. Wi-Fi password entered is correct and the same Wi-Fi
network is used on the mobile device.
�. Camera is in pairing mode.
�. Check your WiFi for network activity.
If there doesn't work please or you have any other problems,
please contact support@arenti.com to get help.
Notice
If you have multiple cameras, please follow steps again to
add devices one by one.
To change Wi-Fi network, please restore the camera to
factory settings and follow steps to add the camera.
support@arenti.com
EN
Scan the
QR code
of APP