Arenti PETCAM1T Guía Rápida página 9

Pairing
Step � Open APP home page, Click "+" or "Add" and select
icon according to actual camera.
Note: When pairing, please put the camera and mobile phone
close to the router. If camera is not in the red slow blinking after
�� seconds of powering on, press and hold the reset button for �
seconds to reset, and then restart to pair the camera with the
APP.
Step � Power on the device. For about �� seconds, the camera
will emit start-up tone and LED indicator will flash red slowly.
and press "Next" on App.
support@arenti.com
EN