Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
Fault
Light on, but
motor does not
work
Both light and
motor do not
work
Oil leakage
Vibration
Insufficient
suction
The
machine
inclines
6mm
3mm
3mm
3mm
Cause
The blades are blocked.
The capacitor is damaged.
The motor is damaged.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Apart from the above mentioned, check the following:
Light damaged.
Power cord loose.
Outlet and the air ventilation entrance
are not tightly sealed.
The blade, if damaged, can cause
vibrating.
The motor is not tightly fastened.
The cooker hood is not tightly fixed.
The distance between the cooker
hood and the cooker top is too large.
Too much ventilation from open doors
or windows.
The fixing screws are not tight
enough.
The hanging screws are not tight
enough.
Check the blade.
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per the electric
diagram.
Take down the outlet and seal with glue.
Replace the blade.
Fasten the motor tightly.
Fixed the cooker hood tightly.
Readjust the distance.
Choose a new place to install the
appliance or close some doors / windows.
Tighten the fixing screw and make it
horizontal.
Tighten the hanging screw and make it
horizontal.
11
Solution
Publicidad
