Página 1
I N S TA L L AT I O N G U I D E G U I D E D ’ I N S TA L L AT I O N G U Í A D E I N S TA L A C I Ó N PULL DOWN BAR FAUCET AP65D1LM SERIES ROBINET DE BAR À...
Página 2
Parts List Faucet Body Mounting Gasket Pulldown Hose Mounting Washer Spray Wand Mounting Nut O-ring H. Hose Weight Liste des pièces Joint d’étanchéité de Corps du robinet montage Tuyau de raccord du bec rétractable Rondelle de montage Bec de pulvérisation Écrou de montage Joint torique H.
Página 3
Quick Connect Adapter Adaptateur de raccord rapide Adaptador de conexión rápida Place O-ring (D) onto base of Faucet Body (A) aligning ribs on faucet (if present) to slots on Slide Mounting Gasket (E) and Mounting Washer (F) up onto Faucet Body (A) under sink O-ring (D).
Página 4
Tape Ruban adhésif Quick Connect Adapter Cinta Adaptateur de raccord rapide Adaptador de conexión rápida Install Zone Zone d’installation Zona de instalación Insert Pulldown Hose (B) into end of quick connect adapter. Push until a “click” is heard. IMPORTANT - Locate Hose Weight Locator Mark on Pulldown Hose (B). Install Hose Weight (H) just above start of loop curvature in hose on the same side of hose as locator Tug downward to test engagement.
Página 5
Attach Spray Wand (C) to Pulldown Hose (B) and tighten it with finger. Tighten Pulldown Hose (B), flush with Spray Wand (C). Do not overtighten. Fixer le bec de pulvérisation (C) sur le tuyau rétractable (B). Serrer à la main. Serrer le tuyau de raccord du bec rétractable (B), rincer à...