BASIC OPERATION
EN
Please note all (Ref.) refer to Pages 1-5 Controls and Functions.
Plug the connector into the back of the system labelled AC- (Ref.20) and the power
supply into the mains.
Ensure the antenna (Ref.14) is extended as far as possible so that you can rotate it
which will enable you to get the best signal you can.
Switch the button on the rear of the unit to "On" (Ref.19). Once the screen switches
on, "--:--" should display. Press the 'Power/Standby' button on the unit (Ref.8) or on
the remote (Ref.21). It will automatically take you to DAB/DAB+ radio mode or the
previous mode you were using.
When DAB Radio is activated for the first time the display will show "Full Scan". Press
down the Navigate/OK dial on the unit (Ref.13) or on the remote (Ref.47). The unit will
then scan and store all available stations.
To scroll through the stations, hold down the 'Next' button (Ref.46) until the station list
appears. Then use the Navigation/OK dial on the unit, or the 'Previous' (Ref.31) and
'Next' buttons (Ref.46) on the remote. Press down the Navigate/OK dial or press the
'Play/Pause' button on the remote (Ref.47) to listen to a station.
Press the 'Mode' button (Ref.7) on the unit or on the remote (Ref.22) to change mode.
9