Descargar Imprimir esta página

MikroTik LtAP mini Manual De Instrucciones página 3

Ocultar thumbs Ver también para LtAP mini:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
 Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to
follow the correct procedures could result in a hazardous situation for people and damage to the
system.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
 In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
 This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures.
 To avoid contamination of the environment, separate the device from household waste and dispose of it
in a safe manner, for example, in designated areas. Become familiar with procedures for properly
transporting the equipment to designated collection points in your area.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and
European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik
device should be installed and operated no closer than 38 centimeters from your body, occupational
user, or the general public.
Manufacturer: Mikrotikls SIA, Unijas iela 2, Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v7.7 или най-новата версия, за да се
гарантира спазването на местните регулаторни разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби, включително
работата в рамките на законни честотни канали, извеждане на продукция изисквания за
захранване, окабеляване и изисквания за динамичен избор на честота (DFS). Всички
радиоустройства на MikroTik трябва да бъдат професионално инсталиран.
Това е устройство за безжична мрежа. Можете да намерите името на модела на продукта
на етикета на регистъра (ID).

Publicidad

loading