Xiaomi Smart Elite Y-600 Manual De Usuario página 7

How to Use
On/Standby
Tap the on/standby
button to turn on the
purifier. When the purifier
is on, tap the
on/standby button to
enter standby mode.
Adjusting the
display's brightness
Press the display on/off
button to cycle through
its brightness levels: on,
dim, and off.
Switching mode
While the purifier is on, tap
the mode switch button to
cycle through modes.
Resetting Wi-Fi
When connecting the purifier
to the app for the first time or
unable to connect to it, press and
hold the display on/off button for
7 seconds. The purifier will make
a notification sound once Wi-Fi is
successfully reset.
Enabling & disabling plasma/UV sterilization
Tap the plasma on/off button to enable or disable
plasma sterilization. Tap and hold the plasma
on/off button for seven seconds to enable or
disable UV sterilization.
Enabling/disabling the child lock function
Press and hold the mode switch button for
7 seconds to enable or disable the child
lock function. The purifier will make the
corresponding notification sound and show
the corresponding icon on the display.
6
Child Lock Enabled
Child Lock Disabled