Publicidad
7.
Adjust the level of the microphone connected to the [MIC] jack.
1. Press the [MIC] button (which lights up), and turn on the microphone input.
2. While holding down the [SHIFT] button, press the [MIC] button.
The "Mic Setup" screen is displayed.
3. Adjust the input level using the [MIC TRIM] knob until the "CLIP" indicator on the screen
momentarily lights up red.
8.
Play Demo Project.
Use the Demo sound source in the SD card to output sound.
1. Check that the following knobs are set to the minimum level (turned all the way to the
left).
• [OUTPUT VOLUME]: knob
• [PHONES VOLUME]: knob
2. Press the trigger pad that is lit to play an audio clip (audio).
• If you press any trigger pad, an audio clip is played.
• The method for making sound differs depending on which color the trigger pad lights up.
3. Turn the [OUTPUT VOLUME] knob and [PHONES VOLUME] knob slowly clockwise to adjust
the output volume level.
• Adjust the output volume level to the powered speakers or headphones.
• If no MAIN OUT sound is output from the [PHONES] jack, turn the [MONITOR MIX] knob to the MAIN
side.
9.
Adjust the volume level of the output devices such as the powered
speakers and headphones.
• If no sound is produced from the output device connected to the [LINE OUT] jack, check whether the
volume on the output side is appropriately adjusted.
Specifications (Outline)
Audio input
LINE/PHONO IN jack: RCA pin jack (Select LINE or PHONO.)
PHONO GAIN switch (LO/HI)
MIC IN jack: Standard phone jack (φ 6.3 mm, monaural TS)
* Exclusive for Dynamic Microphone
AUX IN jack: Stereo mini jack (φ 3.5 mm)
* Mix directly to LINE OUT.
Audio output
LINE OUT jack: RCA pin jack
HEADPHONES jack: Standard stereo phone jack (φ 6.3 mm)
Controller input
FOOT SW jack: Standard phone jack (φ 6.3 mm, TS)
* Connect the optional PS-1 or PS-3.
USB jack
microB (MIDI, Audio (IN x 2ch, OUT x 34ch (48 kHz/16 bits, You need to install
the KORG KaossReplay Audio Driver in the Windows environment.)))
MIDI jack
IN/OUT (DIN 5pin) and the MIDI function are exclusive to the USB jack (IN x 1
port, OUT x 1 port).
External storage
microSD card, microSDHC card (32GB Max)
* Class10 or higher, UHS-I (U1) recommended (However, this does not
guarantee operations with all cards.)
Product dimensions
185 (W) x 284 (D) x 56 (H) mm
Product weight
2.0 kg
* Excluding microSD card and AC adapter.
Power supply
DC 5V/3A
Accessories
Owner's manual (Quick Start Guide)
AC adapter
USB cable (Type A to microB, 1 m)
microSDHC Card (inserted into the microSD card slot of the main body at time
of shipment.)
• The specifications are subject to change without notice for the purpose of improvement.
• Various names, company names, product names, etc. described in the text are trademarks or registered
trademarks of their respective companies. Some ™ and ® marks are not used in the text.
En
En-5
Publicidad
