Publicidad
Idiomas disponibles
Idiomas disponibles
2. Align armrests with holes on bottom of seat cushion.
Attach armrests to seat using eight M8 x 40 mm bolts,
lock washers and washers. (See Figure 2)
Figure 2
M8 x 40 mm Bolt
3. Align mechanism with holes on bottom of seat
cushion. Use four M8 x 25 mm bolts, lock washers
and washers to secure. (See Figure 3)
Figure 3
M8 x 25 mm Bolt
PAGE 2 OF 9
ASSEMBLY CONTINUED
Lock Washer
Washer
Lock Washer
Washer
Mechanism
NOTE: For easy assembly, place seat cushion and
backrest upside down on packaging carton.
(See Figure 4)
4. Align backrest bracket with side of seat cushion and
backrest. Use four M8 x 25 mm bolts, lock washers
and washers to secure. Repeat for opposite side.
(See Figure 4)
NOTE: Inside of backrest brackets are marked
"L" for left side and "R" for right side installation.
Figure 4
Lock
Washer
M8 x 25 mm Bolt
5. Lower assembled chair onto gas lift. Press down on
seat cushion to secure. (See Figure 5)
Figure 5
Seat
Cushion
Washer
Backrest
0224 IH-11087
Publicidad
