Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your new appliance
3. Separate the two connectors on
the left side door. To remove the
wire connector, press the top of the
connector (B) and separate it from
the other one. To remove the water
coupler from the hinge, twist and
pull the clips from the coupler.
Remove the water line (C) while
pressing the movable part (D) of the
water line coupler.
4. Remove the 3 screws (E) fixed on
the hinges, with a Wrench (8mm)
and 1 ground screws (F) attached
to the hinge with Philips (+)
screwdriver. Remove the upper left
door hinge (G).
5. Use our both hands to open the
door more than 90°. Lift it up and
take it off.
6. If necessary, remove the 2 hex head
bolts hinges (I) with an Allen wrench
(5mm). Remove the lower left door
hinge (H).
15
Publicidad
