Publicidad
Idiomas disponibles
Idiomas disponibles
Remove all parts from carton
and lay out on a non scratch
surface such as a rug or carpet.
ASSEMBLY REQUIRES TWO ADULTS
1. Locate Base (A) and set out finished side
up on the floor.
2. Locate the Center Right Side Panel (C)
and Right Side Panel (F), insert one Wood
Dowel (N) into each of the pre-drilled
holes. Then use Bolts (L) and Washers (M)
through the pre-drilled holes in the
mounting blocks. Attach the side panel to
Base (A).
And repeat for the opposite side.
3. The Cabinet must be level, for the proper
functionality of doors and as a safety
precaution. There is a leveler located on
the bottom of the Support/Leveling Foot,
the height can be increased by twisting
counter-clockwise.
4. Insert one Wood Dowel (N) into each of
the pre-drilled holes on the Base (A),
attach the Support Bar (D) to the Base (A).
5.
Insert one Wood Dowel (N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 4. Then locate
Top Panel (G) and lay finished side up
on top of completed assembly. From the
inside, attach Top Panel (G) using
Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
6. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom, left
and right.
E-3
Center
Left
Left
Side
Side
Panel
Panel
B
L
E
M
N
N
N
N
Support/Leveling
Foot
N
N
N
N
Support
Bar
M
L
Center
Right
Side
Panel
C
N
A
Base
Leveler
Top Panel
G
N
N
N N
D
N N
Meijer.com
Right
Side
Panel
F
L
M
N
N
N
D-3
N
N
M
L
D-4
Publicidad
