After Use - Nova LAUS Manual De Instrucciones Y Garantía

GB
WATER ADDING
1.remove the plug ; cut off electricity
2.press the steam button to release the pressure until no steam comes out
3.open slightly the safety cover, release the remaining steam, place the steamer in a cool place for 5 minutes,
open the safety cap completely.
4.use the funnel and measuring cup to add some cool or warm water.
5.put back the safety cover and screw it tight.

AFTER USE

1.remove the plug, cut off the electricity
2.press the steam button to release the remaining steam.
3.open slightly the safety cover, release the remaining steam, place the steamer in a cool place for 5 minutes,
open the safety cap completely.
4.Empty the tank from the remaining water, clean the surface of the steam cleaner.
5.put back the safety cover and screw it tight.
NOTE
1. the switch light will be on when the power is on.
2. please, screw the safety cap firmly.
CARE AND CLEANING
SURFACE CLEANING
switch off the electricity and unplug from the outlet before cleaning.
Wipe the cleaner with a soft, damp cloth with mild detergent , then clean it with a dry cloth.
Do not use other chemical products and keep the surface dry.
TANK CLEANING
switch off the electricity and unplug from the outlet before cleaning.
clean the tank every 3 months.
remove the safety cover. Fill the tank up to the maximum level with clear water; risen the inside of the tank and
pour the water out. repeat this operation 2-3 times. the tank will be cleaned.
NOTE
Do not add any other chemical liquid to the water for cleaning.
PARTS CLEANING
Wash all parts after using, put them into the box and keep it cool and dry.
LIBRETTO.indd 15 13-06-2006 10:05:23