Beper 70.411 Manual De Instrucciones página 9

EN
Aroma Diffuser Use instructions
3. Add some drops of essential oil. It is advisable to use maximum two drops of essence, in order to avoid da-
mages to the product.
4. Close the tank by paying attention to match the two guidelines, then reposition the cover.
5. Plug the power supply
6. Press MIST button to switch on diffusion, adjust the speed and turn off the product
7. Press LIGHT button to turn on or off the LED light.
Note: do not tilt the aroma diffuser nor attempt to empty or fill it while it is turned on.
MAINTENANCE
ATTENTION! Always pull out the plug before maintenance!
Press MIST button until the diffuser is turned off and pull out the plug from the socket.
1. Remove the cover and the tank lid.
2. Empty the water tank
3. Use a damp cloth to clean the exterior of the housing. Use a clean sponge to clean the water tank. Empty and
rinse the water tank with a clean cloth every time a different essential oil has been used. Sometimes full the tank
with some water with vinegar and let it cool for some minutes (15 max) than empty the tank, rinse and dry it.
4. Before storing the appliance, make sure it is dry to avoid the formation of mold and/or unpleasant smells.
Technical data
Power supply: : DC: 18V-9W-50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9