Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Front panel
3
1
2
1: Remote control sensor.
2: LED indicator: RED - STANDBY.
3: Keypad
Rear AV connections
1
Rear (Side) AV Connections
1. ETHERNET: Connect the network interface.
2. OPTICAL: Optical digital audio output.
3. USB: Connect your USB memory device (e.g. USB memory stick) for PVR recording or to playback com-
patible files stored on it.
4. HDMI: Connect to the HDMI output of up to 4 external video sources (e.g. DVD player, game console or
Blu-ray player).
5. AV IN: Connect to the AV OUT jack of your external video source (e.g. DVD player)*.
6. SAT INPUT: Connect the satellite to receive the TV signal.
7. ANT.IN: Connect the antenna or 75 Ohm coaxial cable to receive the TV signal.
8. HEADPHONES: Connect the headphones here. Note: Connecting the headphones will mute the sound
from the TV's built-in speakers.
9. CI CARD IN:
* Use the supplied connector cable to convert the mini AV port to RCA inputs.
Keypad
The buttons on the TV are located on the bottom of the TV,
near the LED indicator.
1: Select the next channel or scroll up.
2: Increase the volume or scroll right.
3: Decrease the volume or scroll left.
4: When the TV is in standby mode, press to switch on.
When the TV is switched on, press to enter the menu.
Use the joystick to navigate through the interface and press
to enter the highlighted item.
When the TV is on, press and hold to enter standby mode.
5: Select the previous channel or scroll down.
2
3
3
4
4
5
9
CI CARD IN
EARPHONE
8
9
English
6
7
infiniton.es
Publicidad
