Diamond ES14-E Manual página 14

E020401B
different times up tot eh display shows "SELECT
A PROGRAM"
XXX
With this parameter is possible to select the type
of currency, seeing the possibilities with the
buttons "UP" and "DOWN" XXX token
EUR euro
DKR Danmark Krona
L English Pound
SKR Swedish Krona
SFR Swiss Franc
CS Canadian Dollar
USD American Dollar
YEN Japanese Yen
Chosen the symbol press "ENTER" to confirm.
ANOTHER CURENCY
You can add another personalized currency (three
letters), by pressing "ENTER" insert the three
letters and confirm with ENTER.
DECIMAL CURRENCY
Permits to define the number of decimal cipher of
the personalized currency. Press "ENTER" and
include the number. Press "ENTER" again to
confirm
MINIMUM PRICE
The coefficient for which the specific price of all
the programs is multiplied, to obtain the starting
minimum amount.
For example: having defined the parameters "Cost
of the program" and "minimum time" (par. 11), it
has been programmed that the first program
HIGH (90°) has a 10 minutes duration (minimum
time) and that its cost is 1€ (cost of the program).
If it is programmed for a MINIMUM PRICE=3€,
the minimum amount to start the program will be
of 3€. The final customer will buy a 30 minutes
drying at 90°C. Started the program it will be
possible to increase the drying time by adding just
1€ (cost of the program) which it will add a further
10 minutes drying (minimum time).
While appears "MINIMUM PRICE" on the display
press "ENTER". The display will show "1". To
modify it, insert the amount as for the desired
program and press "ENTER".
TOKEN 1
Recognized by the first coin box. Press "ENTER"
and insert the value of the coin in the first coin
box. "ENTER" to confirm.
TOKEN 2
Recognized by the second coin box (if provided).
Press "ENTER" and insert the value of the coin in
the second coin box. ENTER to confirm
"UNITY TEMPERATURE" appears on display .
Press stop twice and go out from programming.
To program the costs and the minimum times of
each program, please refer to the correspondent
parameters, (par. 11) "PROGRAMMING".
13. ALARMS
Please find hereafter a list of the alarms which
stops the machine:
DEPRESSION
At the starting -up of the heating phase there is
not enough depression inside the dryer; the
buzzer will ring and the machine will be blocked.
Press the STOP key to stop the alarm; the display
will show "PRESS STORT": the machine is ready
for operation. If the alarm rings again, turn off
power connection and call technical assistance
SENSOR DEPRESSION
L'allarme appare quando si tenta di avviare un
programma mentre la ventola è ancora in
funzione. Attendere trenta secondi e ritentare
l'avviamento. Se il segnale persiste spegnere la
macchina, togliere
rivolgersi al servizio di Assistenza Tecnica
OPEN DOOR
The door is open. Close the door and press
START to activate the program or STOP to
interrupt it. If the alarm rings again, turn off the
machine, take off all connections and call for
assistance.
OPEN FILTER
The filter box is not closet correctly. Close again
the filter box and press "START" to restart the
program or "STOP" to interrupt it. If the alarm
rings again, also when the filter box is closed, turn
off the machine, take off all the alimentations and
call for assistance.
TEMPERATURE PROBE
The temperature probe is broken: the machine
stops and the buzzer rings. Press STOP to stop
the sound signal; the display will show "SELECT".
The machine is ready for operation, If the alarm
rings again, take off all connections and call
technical assistance
BLOCK THERMIC MOTOR
One of the motor is overheated: the machine stop
and the buzzer rings. Pressing STOP the alarm
disappears and on the display appears "SELECT
A PROGRAM". Wait for few seconds until the
motors cool down. Rearm thermal cutout and start
the machine. If the signal persists switch off the
machine, take off all the feedings and call
technical assistance
DEAD FLAME
It appears only in machines with gas heating.
Three consecutive attempts of lighting of burner
have failed. The buzzer rings and the machine
stops. Pressing STOP the alarm disappears and
on the display appears "SELECT A PROGRAM";
the machine can restart with a new program. If the
signal persists switch off the machine, take off all
the feedings and call technical assistance
GAS PRESSION
It appears only in machines with gas heating; a
fall of alimentation has occured. The buzzer rings
and the machine stops. Pressing STOP the alarm
disappears and on the display appears "SELECT
A PROGRAM"; the machine can restart with a
new program. If the signal goes on switch off the
machine, take off all the alimentations and call
technical assistance.
14
08/05/03
tutte le alimentazioni e