nuliie NUBW01 Manual De Usuario página 10

Adjust Temperature
Operating in food warming mode:
1. The bottle should be sealed before adding 5.4 oz (160 ml) of drinking water.
2. Press the mode switch" "button to choose the "Food" mode.
3. Press the level up" "/down"V"buttons to select the desired temperature (86 to 176°F
(30-80°C) optional). and the gadget will flash twice and start working automatically
after a "beep".
4. When the "Food" light starts to flash, the milk has reached the desired temperature and
started entering the heat preservation phase. The maximum amount of time for heat
preservation is two hours. Five beeps indicate the end of the heat preservation process
before the thermos cup enters standby mode.
Precautions:
1. The "water bath heating" technique is used in this mode. The temperature of the water is
shown on the screen in real-time. During the heating process, the temperature displayed
on the screen will increase over the set temperature and then gradually fall back to the
set temperature to raise the temperature in the bottle to the required level.
2. To help the food heat more quickly and evenly, stir the baby food frequently while
cooking. Be careful not to bum your fingers when stirring.
3. It takes roughly an hour to reheat baby food from room temperature and around two
hours to thaw frozen purees.
Start Working after a Beep
10
Beep When Done